TJR HC-255A Indexing Table

TJR products are of an exceptional quality and incredible value for money and come with a 1 year warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM are main agents for the product and can therefore support it fully throughout its lifetime.

Should you want to machine long bar components that need to be mounted through the centre hole of the table, this unit has a closed bore, with a location diameter of 30mm diameter by 12mm deep. You need to take account of the number of divisions you require to establish the overall width and suitability to mount this device. This device style may be an issue due to width of the unit, such as collision with machine doors with Y axis travel forward.

This device is ideal for the larger VMC machine of around 1000 in X

You should consider the Y axis travel of the machine and if there would be any interference between the guard of the rotary table and the doors of the machine, particularly when referencing the machine, as a lot of VMC machines reference with the Y axis travelling to the front of the machine, towards the operator.

This is an ideal design of product for any VMC machine or a multitude of other operational uses, particularly those with a good working envelope.

Additional equipment available for this device would be a 200mm or 250mm 3 jaw chuck and backplate and matching bearing tailstock.
Carrying capacity vertically unsupported 110kg or 200kg with matching tailstock.
Centre height 160mm
Centre bore 30 x 12mm
Through hole N/A