TJR FHR-255CL Tilting CNC Rotary Table

TJR products are of an exceptional quality and incredible value for money and come with a 1 year warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM are main agents for the product and can therefore support it fully throughout its lifetime.

The TJR FHR-255CL is a heavy duty high speed, CNC rotary table tilting device, ideally suited to the larger machining centres for machines with a minimum bed length of 1000mm and above. The device features a faceplate diameter of 255mm with a swing capability between the cradle section of 400mm and extensive titling range for multiple uses. This device is around 1,003mm in overall width subject to motor selection which suits a wide range of machine tool bed lengths the centre line of tilt along the X axis being around 430mm from the rear of tilting device towards the read of the machine bed. The unit has an exceptional tilting range of -110 to + 110 degrees.

The unit has a 80mm spindle bore directly through the table and a has a centre height of 290mm in the vertical position (90 degrees) and 290mm in the horizontal position (0 degrees) with faceplate. An excellent carrying capacity of 75kg through the whole tilting range and 100kg horizontally or more between centres and speeds of up to 33.3rpm to rotary axis and 25rpm on the tilting axis, dependent on motor selection. (Based on a 4,000rpm motor). The TJR FHR-255CL CNC rotary tilting table is offered without motors, but can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses. This range of TJR devices come with dual lead worm and wheel, which means that backlash adjustment, should it ever be required, is simple.