Motor is mounted to the right side on this device and leaves the total through hole capability should you want to machine long bar components that need to be mounted through the centre hole of the table. If this device style may be an issue due to width of the unit, such as collision with machine doors with Y axis travel forward, you should look at rear mounted motor versions. In selecting a side mount motor version you should consider the Y axis travel of the machine and if there would be any interference between the guard of the rotary table and the doors of the machine, particularly when referencing the machine as a lot of VMC machines reference with the Y axis travelling to the front of the machine, towards the operator. Additional equipment available for this device would be a 160mm or 200mm 3 jaw chuck and backplate and matching tailstock. Carrying capacity vertically unsupported 100kg or 200kg with matching tailstock. Net weight 75kgThrough bore 50mmMaximum speed 16. 6 rpmOne only in stock, strictly subject to prior sale – contact technical sales for any further assistance. ;The model number relates directly to the faceplate diameter. The Haas HRT models can be used in vertical and horizontal applications, the motor is mounted to the right side of the device and therefore can be laid on its back. The Haas HRT-210 is a full contouring 4th axis device. Can be controlled directly from the machine tool control or via a separate programmable box via M signal start (not included). All Haas products can be prepared to suit any machine interface and connection, regardless of machine make, model or control type. Please contact our technical sales team should you need further information. This product comes with a 6 month ;warranty covering parts and labour. Please note: ;This device ;can take 2 to 3 weeks to prepare for a specific interface.