UCAM USSR-201-TN Tilting CNC Rotary Table

UCAM products are of an exceptional quality and incredible value for money and come with a 12 months warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM, can support this device for its lifetime.

The UCAM USSR-210-TN (pneumatic clamping) is a heavy duty small but agile, CNC rotary table tilting device, ideally suited to the mid-sized machining centres with powerful load bearing. Featuring a faceplate diameter of 200mm and extensive titling range for multiple uses. This device is around 700mm in overall width subject to motor selection which suits a wide range of machine tool bed widths. The centre line of tilt being 332mm from the centre line to the rear of the machine table. The unit has an exceptional tilting range of -110 to + 110 degrees.

The unit has a 60mm spindle bore directly through the table and a has a centre height of 200mm in the vertical position (90 degrees) and 303.5mm in the horizontal position (0 degrees) with faceplate. An excellent carrying capacity of 65kg through the whole tilting range and 100kg horizontally or more between centres and speeds of up to 33.3rpm in the rotary axis and 25rpm in tilt dependent on motor selection. (Based on a 3,000rpm motor). The UCAM USSR-201-TN CNC rotary tilting table is offered prepared to suit siemens 828D control interface at no additional cost, however it can be converted to Fanuc at an additional cost if requested. Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses.