TJR FHR-500C Tilting CNC Rotary Table

TJR products are of an exceptional quality and incredible value for money and come with a 1 year warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM are main agents for the product and can therefore support it fully throughout its lifetime.

The TJR FHR-500C is a heavy duty, high speed, CNC rotary table tilting device, ideally suited to the larger machining centres for machines with a bed width above 1400mm. The device features a faceplate diameter of 500mm with a swing capability between the cradle section of 653mm and extensive titling range for multiple uses. This device is around 1465mm in overall width subject to motor selection which suits a wide range of machine tool bed widths. The centre line of tilt being 945mm from the centre line to the rear of the machine table. The unit has an exceptional tilting range of -110 to + 110 degrees.

The latest FHR-C (C = Cradle type with low centre height providing more tooling room on VMC’s) tilting range from TJR, with fantastic features including high speed rotation and a hydraulic high power clamping system for heavy duty milling. The unit has a 220mm spindle bore directly through the table and a has a centre height of 440mm in the vertical position (90 degrees) and 440mm in the horizontal position (0 degrees) with faceplate. An excellent carrying capacity of 300kg through the whole tilting range and 500kg horizontally or more between centres and speeds of up to 25rpm in the rotary axis and 11.1rpm in tilt dependent on motor selection. (Based on a 4,000rpm motor). The TJR FHR-500C CNC rotary tilting table is offered without motors, but can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary and tilt axis motors are mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances. This range of TJR devices come with dual lead worm and wheel, which means that backlash adjustment, should it ever be required, is simple.