The latest FHR-C (C = Cradle type with low centre height providing more tooling room on VMC’s) tilting range from TJR, with fantastic features including high speed rotation and a hydraulic high power clamping system for heavy duty milling. There is also an extended cradle version available that can swing 400mm (FHR-255CL). The unit has a 80mm spindle bore directly through the table and a has a centre height of 290mm in the vertical position (90 degrees) and 290mm in the horizontal position (0 degrees) with faceplate. An excellent carrying capacity of 75kg through the whole tilting range and 100kg horizontally or more between centres and speeds of up to 33.3rpm to both axes, dependent on motor selection. (Based on a 4,000rpm motor). The TJR FHR-255C CNC rotary tilting table is offered without motors, but can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses. This range of TJR devices come with dual lead worm and wheel, which means that backlash adjustment, should it ever be required, is simple.