TJR FAR-170A Tilting CNC Rotary Table

TJR products are of an exceptional quality and incredible value for money and come with a 1 year warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM are main agents for the product and can therefore support it fully throughout its lifetime.

The TJR FAR-170A (Compact version) is a heavy duty small but agile, CNC rotary table tilting device, ideally suited to the mid-sized machining centres or for small VMC machines with up to a 500mm wide machine table, featuring a faceplate diameter of 170mm and extensive titling range for multiple uses. This device is around 597mm in overall width subject to motor selection which suits a wide range of machine tool bed widths. The centre line of tilt being 250mm from the centre line to the rear of the machine table. The unit has an exceptional tilting range of -100 to + 100 degrees.

The unit has a 40mm spindle bore directly through the table and a has a centre height of 180mm in the vertical position (90 degrees) and 245mm in the horizontal position (0 degrees) with faceplate. An excellent carrying capacity of 40kg through the whole tilting range and 60kg horizontally or more between centres and speeds of up to 33.3rpm in the rotary axis and 25rpm in tilt dependent on motor selection. (Based on a 3,000rpm motor). The TJR FAR-170A CNC rotary tilting table is offered without motors, but can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses. This range of TJR devices come with dual lead worm and wheel, which means that backlash adjustment, should it ever be required, is simple.