TJR-FAR-160SN Tiliting CNC Rotary Table

TJR products are of an exceptional quality and incredible value for money and come with a 1 year warranty to back up the manufacturer’s confidence in their product. CNCROTARY.COM are main agents for the product and can therefore support it fully throughout its lifetime.

The TJR FAR-160SN (Single-arm Version) is a heavy duty small but agile, CNC rotary table tilting device, ideally suited to the mid-sized machining centres or for small VMC machines with up to a 500mm wide machine table, featuring a faceplate diameter of 160mm and extensive titling range for multiple uses. This device is around 513mm in overall width subject to motor selection which suits a wide range of machine tool bed widths. The centre line of tilt being 346mm from the centre line to the rear of the machine table. The unit has an exceptional tilting range of -110 to + 110 degrees.

The unit has a 25mm spindle bore directly through the table and a has a centre height of 160mm in the vertical position (90 degrees) and 230mm in the horizontal position (0 degrees) with faceplate. An excellent carrying capacity of 20kg through the whole tilting range and 25kg horizontally or more between centres and speeds of up to 44.4rpm in the rotary axis and 16.6rpm in tilt dependent on motor selection. (Based on a 3,000rpm motor). The TJR FAR-160SN CNC rotary tilting table is offered without motors, but can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the rear side on this device, the tilt axis motor is mounted in a rear facing direction on the right hand side of the device and and may restrict the Y axis capability in certain circumstances. This range of TJR devices come with dual lead worm and wheel, which means that backlash adjustment, should it ever be required, is simple.