Ganro TR-200S Tilting CNC Rotary Table

£28,981.00 ex. VAT

Or weekly from: £325.92
Part No.GANRO TR-200S
Delivery lead time: Enquire for Estimate

  • CNCROTARY Weight Icon Ammeter


    310 kg

  • CNCROTARY Full Rebuild Service Icon

    Faceplate Size:

    200 mm

  • CNCROTARY Rotary Height Icon


    H: 445.00mm x L: 886.00mm x W: 590.00mm

  • CNCROTARY Warranty Icon

    1 Year

Additional Information

Recommended Applications

The Ganro TR-200 is a heavy duty mid-size CNC rotary table tilting device, ideally suited to medium VMC machines, with a faceplate diameter of 200mm faceplate or can accept a standard or power chuck.

Device Specifications & Details

The latest TR-S (S = shorter for use on VMC’s) tilting range from Ganro, with major developments over earlier models with major increases in speed, with a high power pneumatic clamping system. The unit has a 35mm spindle bore directly through the table and a has a centre height of 215mm in the vertical position (90 degrees) and 275mm in the horizontal position (0 degrees) with faceplate. This device is around 690mm in overall width subject to motor selection which suits a wide range of larger machine tool bed widths and an overall height of 345mm. The unit has a standard tilting range of -15 to + 115 degrees. An excellent carrying capacity of 50kg through the whole tilting range and 100kg horizontally or between centres and speeds of up to 27. 7rpm in the rotary axis and 11. 1rpm in tilt dependent on motor selection. (Based on a 2,000rpm motor). Net weight of this device is 310kg. The GANRO TR-200S CNC rotary tilting table without motors, can be prepared to suit any interface at additional cost (see our interface listings for details and costs for “external interface” (motor, switch, cable and connector requirements if you already have a “4th / 5th ;axis interface” in the machine) and machine interface costs (if you do not have the additional axes fitted). Rotary axis motor is mounted to the right hand side on this device and may restrict the Y axis capability in certain circumstances, the tilt axis motor is mounted in a rear facing direction on the far side of the device and should not have any bearing on traverses. This range of GANRO devices come with dual lead worm and wheel, which means that backlash adjustment is simple. GANRO is a leading class manufacturer from Taiwan and in our experience build a very fine device with a very long service life, probably greater than those we have experienced from other Taiwanese makers. GANRO products carry a standard one year parts and labour warranty and have a full working partnership with CNCROTARY. COM, who provide a second year completely free. This device may take from 2 to 3 weeks to configure as required.

Not sure this is what you're looking for? View similar items...

Interested in the Ganro TR-200S Tilting CNC Rotary Table? Enquire today >

We have already installed the table in the machine and we are pleased with your work.

- Karolis, Leading Fabrication Company, Lithuania

Brilliant service, thank you!

- Mike, Established Engineering Company, UK

The table works very well and with good accuracy, you did a very good job. We are grateful that we have your professional technical support that can help us.

- Danila, Leading Aerospace Company, Romania