Motor is mounted to the right side on this device and leaves the total through hole capability should you want to machine long bar components that need to be mounted through the centre hole of the table. If this device style may be an issue due to width of the unit, such as collision with machine doors with Y axis travel forward, you should look at rear mounted motor versions such as model type DR-B. In selecting a side mount motor version you should consider the Y axis travel of the machine and if there would be any interference between the guard of the rotary table and the doors of the machine, particularly when referencing the machine as a lot of VMC machines reference with the Y axis travelling to the front of the machine, towards the operator. Additional equipment available for this device would be a 100mm or 125mm 3 jaw chuck and backplate and matching tailstock. Carrying capacity vertically unsupported 35kg or 75kg with matching tailstock. Net weight 35kg If not in stock can be ordered on short lead time – contact technical sales. The model number relates directly to the faceplate diameter. All Ganro products can be prepared to suit any machine interface and connection, regardless of machine make, model or control type.